Kyusen Machinery Enterprise
A-1-26 & A-M-26,
Kompleks Industri Puchong,
No.1, Jalan TPP 1/6,
Taman Perindustrian Puchong,
47160 Puchong,
Selangor, Malaysia.
+603-8061 3524
+603-8060 3524

Darda Rock Splitters C20 V

Previous 1 / 3 Next

Darda Rock Splitters C20 V  Rock Splitter Darda


• Easy replacement of wear parts
• Rotatable and very maneuverable
• Automatic wedge lubrication
• Multiple mounting options
• Lowest power-to-weight ratio on the market
• Use even under water

 Dimension LxWxH   1833 x 721 x 557 mm
 Weight 405 kg / 890 lb
 Recommended carrier weight³ 5 - 7 t
 Recommended Brokk machines          Brokk 300 / 500 / 520D       
Hydraulic connection
 Connection pressure, min. 17.5 MPa (175 bar)
 Connection pressure, max. 25 MPa (250 bar)
 Oil flow, min. - max.              25 - 100 l/min          
 Rotary drive
 connection pressure, max.
25 MPa (250 bar)
 Rotary drive oil flow, max. 30 l/min
 Operating pressure 50 MPa (500 bar)
Wedge set
 Wedge set length N / L 640 / 840 mm
 Drillhole diameter 76 mm
 Drillhole depth N / L, min.   750 / 950 mm  
 Splitting distance N / L 22 / 25 mm
 Theoretical splitting force
 N / L
           1500 / 1800 t           
Darda Special Lubricant

1. Vertical – vertical operation
Connected to carrier via side mounting plate. Rock Splitter connected to guide rail by chain.
Endlessly rotatable through hydraulic rotary drive,
enabling precise setting of splitting direction and splitting course. Only one machine operator required.

2. 360° rotary drive
Easy positioning and setting of the splitting direction and the course of the splitting.

3. Internal pressure booster
Full splitting force independent of the input pressure of the carrier thus always guaranteed.

4. Integrated, automatic wedge lubrication system
Lubrication system and shut-off device guarantee lifetime and cost savings.
Factory setting allows 80 – 100 splits per filling. Lubricant quantity adjustable.
Ready for use again in the shortest possible time due to cartridge filling via rechargeable battery refill pump.

5. Length splitting insert selectable
Two possible lengths can be selected depending on the type of rock and rock composition.

6. Specially developed hardening process
Hard metal layer of the counter wedges enables the transmission
of the very high forces and provides long-lasting protection against corrosion, seizure and wear.

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
*only support gif, jpeg, jpg, png, pdf

Switch to Mobile Version